FAQ
Sorry for your inconvenience, but please contact us from our homepage inquiry form.
The difference between TOYORON Hose and SUPER TOYORON Hose is the difference in oil resistance of the hose outer skin, and SUPER TOYORON Hose is more oil resistant. HYPER TOYORON Hose is a hose that is more oil resistant to the inner tube and outer skin than TOYORON Hose and SUPER TOYORON Hose.
There are several types of hoses complying with the Food Sanitation Act. Select a hose that meets the operating conditions. In addition to the Food Sanitation Act, there are hoses suitable for FDA and other legal regulations.
This will not result in damage to the hose, though it may stick to the outside surface. We cannot, however, guarantee the TOYOSILICONE Hose for uses above 70℃.
Due to the characteristics of the TOYOSILICONE Hose, it is a material with higher gas permeability (porous) than vinyl hoses. If high-temperature water exceeding 100 degrees is used, the steam of the high temperature water will permeate the inner pipe of the hose, which may easily damage the reinforcement thread and reduce the hose pressure resistance performance. The hose that can flow hot water up to 140 °C is the TOYOSILICONE Steam Hose.
TOYOCONNECTOR Series is couplings dedicated for TOYOX Hoses. Connectability with other companies’ hoses is not guaranteed. Refer to the detailed page of the corresponding TOYOCONNECTOR for compatible hoses.* Compatible hoses and sizes vary depending on the TOYOCONNECTOR part number.
Dedicated couplings are not available. Instead, use the following couplings. For the HITRUN Hose, use of common cap nut type couplings may cause the hose to come off or the inner piping to be cut. Be sure to use the Easy Connecting Joint that uses a hose band to tighten the barb nipple. Example: Nitto Kohki 30SH/PH, 40SH/PH
The TOYOCONNECTOR FERRULE Type coupling is not designed for regular disassembly cleaning. When reusing TOYOCONNECTOR, replace the dedicated replacement sleeve with a new one. Also, please make sure to use a brand-new hose. While the TOYOCONNECTOR FERRULE Type varies depending on the usage conditions, consider five disassemblies a rough guideline for replacing with a new coupling.
The W-SAFETY Nipple Set (WFSN) will be discontinued. The subsequent product will be TOYOCONNECTOR couplings (dedicated to TOYOX Hose) that can securely connect the hose.
These are made-to-order products with delivery dates. Specify the coupling type, hose diameter, length and quantity when placing an order.
The working temperature range of KAMLOK depends on that of the gasket. With that said, the maximum working temperature for KAMLOK models made from polypropylene (PP) is 60°C.
The KAMLOK adapter 633-AB-1/2 has internal thread diameter of 1/2. Only KAMLOK 1/2 and 3/4 have the same fitting size, and available screw standards are 1/2 and 3/4. *Except products made of PP The same applies to 633-FB.
It varies depending on the body material and size. With that said, the working pressure of the hose needs to be taken into account when connecting the hose. Please also be aware that even if the pressure applied is within the working range of the hose, pressure may be released if depending on the clamps situation.
KAMLOK’s mating size is shared between 1/2 and 3/4 sizes. Therefore, the 1/2 and 3/4 sizes of the dust plug and dust cap are the same.
Use the round connecting hole or the ring at the end of the arm.
To securely connect the parts, fasten the clamp in the middle of the peak of the barb, above the depression. Do not fasten it immediately below the hexagonal area of the nipple. We recommend using two clamps if the hose size is greater than 1″ (25mm).
All hose bands are RoHS2 compatible. Certificates are available if necessary. Necessary survey reports can be downloaded by registering as a member. Feel free to use them as needed.
Safety caps for safety bands are not sold separately. In addition, you cannot attach a safety cap to the tip of another manufacturer’s hose band. In addition, do not use the product once the safety cap has been removed.
The maximum tightening torque in the band specification table is guaranteed by the manufacturer. Exceeding it may cause damage or the band tightening function to deteriorate. There is no proper torque value. There are many hose hardnesses, wall thicknesses and coupling types. Setting up is difficult as it depends on which part of the barb to be attached. To solve such issues, we offer special couplings for tightening cap nuts called TOYOCONNECTOR that do not require torque management.
We provide a wide range of support from selecting ideal products for specific usage conditions to downloading certificates regarding laws and regulations, as well as downloading of materials such as catalogs.
You can download useful materials that address issues such as “leaks and disconnections”, “energy-saving measures”, and “odor and coloration.”
We use videos to introduce the benefits of using products and how to install them, which may be difficult to understand just using text and illustrations.
We have compiled frequently asked questions from customers in the “FAQ” section.
To assist you in making selections, we provide common examples of improvements for hoses and couplings through industry-based case studies.