Product Code: HTSI HYBRID TOYOSILICONE HOSE
- FDA
- RoHS2 Certified
HYBRID TOYOSILICONE HOSE (for heat resistance and food)
Made of silicone rubber and able to handle both pressure and vacuum feeds, and high pressures, HYBRID TOYOSILICONE Hoses take advantage of the excellent characteristics of silicone such as heat resistance up to 130°C, low leaching, insulation, and no odor. It can be used in equipment for the food and beverage industry, semiconductor industry, industrial furnace industry and more.
With a general braid type hose, if the location of piping is too narrow the hose may bend or collapse.
Metal coil reinforced type hoses present a variety of issues, such as piping in narrow areas may be difficult due to resistance of the hose, or the metal coil may rust.HYBRID TOYOSILICONE Hose's soft, durable, and compact piping can be used for pressure feed and suction, adopts reinforced materials that do not rust, and helps improve safety, productivity and workability.
In addition to hoses, various dedicated couplings are available for higher safety and productivity.
◆ Click here for heat resistant pressure hoses
◆ Click here for steam hose
◆ Click here for higher suction performance hoses
◆ Click here for a list of heat resistant hoses
Important
Warning
TOYOX products have been developed and manufactured for a broad range of industrial applications.
For applications that require safety, confirm in advance.
Never use for implant or injection applications or other applications where there is a possibility of the product partially remaining in the body.
Toyox makes no guarantee of the adaptability or safeness related to such applications.
Please read the Handling Precautions carefully before use.
(1) Under no circumstances should these hoses be used for nonpolar organic solvents (such as benzene, toluene and hexane), halogenated hydrocarbons (such as methylene chloride or trichloroethane), concentrated strong acids, strong bases, mineral oil or steam. Also, do not use for animal or vegetable oil at temperatures exceeding 70℃. For steam cleaning, apply steam only for a short period, with a saturated steam pressure of less than 0.2 MPa at 130°C.
(2) Do not use for high temperature water at exceeding 100℃. Due to weakened reinforcement (thread), this can cause hose punctures and secondary damage such as injury and burns.
(3) Note that silicone rubber has high gas permeability.Use caution when using this product with gases.Be sure to check “Precautions for Using Our Products Safely” before choosing a product.
- Guidance
- Use Example
- Standards Chart by Size
| Use | ： | For factory equipment (such as filling machines, cooling devices and heat-generating equipment) |
|---|---|---|
| Fluid | ： | Water (Non-drinkable)PowdersOils (Animal and Vegetables)Food (Including Fats)Drinkable WaterChemicalsAir |
| Function | ： |
|
| Certifications | ： |
Food Compliancy no. 595 FDA RoHS2 Compliant |
| Method | ： |
Primary Material: Silicone Materials: Polyester thread / Heat resistant specialized resin Diameter: 12.7mm to 38.1mm Temperature Range: -30℃ ~130℃ High Water Temp(under 100℃) Steam(under 130℃ for a short time) Oils (Animal and Vegetable)(under 70℃) |
Feature:
-
Advantage 1
- These hoses support high-temperature fluids up to 130°C, and the inside of food grade hoses can be washed at high temperature, as long as conditions regarding temperature and usage time are observed.
- They remain flexible even at -30°C and can be used as piping hoses for filling and transporting.
- Its resistance to bending and collapse make it ideal for highly bent piping and driving sections such as in filling machines.
- Reduces product loss and problems caused by interrupted fluid flows due to bending and collapse
-
Advantage 2
- Can be used in suction applications up to -0.05 MPa.
- Made with resin, not metal, reinforcement, the HYBRID TOYOSILICONE Hose returns to its original shape if crushed for a long life.
- Nontoxic and safe and secure for food and beverage use.
- The materials do not leach and there is no odor, providing worry-free conveyance for foods, beverages and more.
- The special, heat-resistant resin reinforcement material means that there is no risk of rusting, for safe, worry-free, and sanitary performance.
- Can be used safely as a food or beverage hose.
- Highly transparent to allow for confidence in fluid verification.
- The reinforcing material is made of special, heat-resistant resin, so no sorting is needed for disposal.
-
Complies with various laws and regulations for safety and security.
- Safe and secure thanks to its compliance with the Food Sanitation Act (Complying with Notice of the Ministry of Health, Labour and Welfare No. 595, 2012), FDA (US Food and Drug Administration) registered product regulations (FDA DMF Type II No.25486 Registration), and revised RoHS2 regulations
*This hose does not use phthalate plasticizers
-
Dedicated couplings provide improved productivity and safety
- A structure that causes very little liquid accumulation. Various dedicated couplings reduce the work of disassembling and cleaning food hose piping
- The dedicated couplings are easy to install and prevent fluid leakage and hose disconnection, improving safety and peace of mind
Worksite Improvement Case Studies
Standards Chart by Size: Temperature Range -30℃ ~ 130℃
| Product Code | Inner dia. x Outer dia. (mm) |
Use pressure (MPa) |
Standard weight (kg/roll) |
Standard length (m) |
Minimum bend radius (mm) |
|---|---|---|---|---|---|
| HTSI-12 | 12.7×19.5 | -0.05~0.5 | 2.1 | 10 | 80 |
| HTSI-15 | 15.9×24.0 | -0.05~0.5 | 3.1 | 10 | 105 |
| HTSI-19 | 19.5×28.5 | -0.05~0.5 | 4.2 | 10 | 140 |
| HTSI-25 | 25.4×35.5 | -0.05~0.5 | 6.3 | 10 | 190 |
| HTSI-32 | 32.0×43.5 | -0.05~0.5 | 9 | 10 | 240 |
| HTSI-38 | 38.1×50.5 | -0.05~0.5 | 11.8 | 10 | 290 |
Packaging: boxed
Coloring: Milky green line added
For barb fittings, use a nipple diameter 5% to 15% larger than the inner diameter of the hose (depending on the hose inner diameter).
*Click here for a simple size chart
| Genuine Couplings : 20 | Coupling Name | TOYOCONNECTOR | TOYOCONNECTOR | TOYOCONNECTOR | TOYOCONNECTOR | TOYOCONNECTOR | Hose Assemblies | Hose Assemblies | Hose Assemblies | Hose Assemblies | Hose Assemblies | Hose Assemblies | KAMLOK COUPLER | KAMLOK COUPLER | KAMLOK COUPLER | KAMLOK TWINLOK TYPE COUPLER | KAMLOK TWINLOK TYPE COUPLER | KAMLOK TWINLOK TYPE COUPLER | KAMLOK ADAPTER | KAMLOK ADAPTER | KAMLOK ADAPTER | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hose Size | Hose Connection | Cap Nut | Cap Nut | Cap Nut | Clamp | Cap Nut | Fastener | Fastener | Fastener | Fastener | Fastener | Fastener | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | |
| Coupling Specification | Male Thread | Ferrule | Ferrule | Ferrule | Ferrule | Ferrule | Hexagon Nut | Coupler | Male Thread | Female Thread | Coupler | Coupler | Coupler | Coupler | Coupler | Coupler | Adapter | Adapter | Adapter | |||
| Primary Material | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | Aluminum Alloy | SUS | PP | Aluminum Alloy | SUS | PP | Aluminum Alloy | SUS | PP | ||
| Product no. | TC3-SS | TC3-FSG | TC3-FS | TC6-FS | TCFS | HF | HM | HNT | HC | H01 | H04 | 633-C-AL | 633-C-SST | 633-C-PP | 633-CL-AL | 633-CL-SST | 633-CL-PP | 633-E-AL | 633-E-SST | 633-E-PP | ||
| Certification |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Hoses Product Code |
Inner dia. (mm) |
Outer dia. (mm) |
 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
| HTSI-12 | 12.7 | 19.5 | ◯ | - | ◯ | - | - | ◯ | - | - | - | ◯ | ◯ | - | - | - | - | - | - | - | - | - |
| HTSI-15 | 15.9 | 24.0 | ◯ | ◯ | ◯ | - | - | ◯ | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| HTSI-19 | 19.5 | 28.5 | ◯ | ◯ | ◯ | - | - | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | - | ◯ | ◯ |
| HTSI-25 | 25.4 | 35.5 | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | ◯ | ◯ |
| HTSI-32 | 32.0 | 43.5 | - | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | - | ◯ | ◯ | - | ◯ | ◯ | - |
| HTSI-38 | 38.1 | 50.5 | - | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |