Product Code: TC3-SS TOYOCONNECTOR-TC3-SS

  • RoHS2 Certified

TOYOCONNECTOR TC3-SS Coupling (TOYOSILICONE Hose Series Dedicated)

Couplings for factory pipe lines (Toyox hose genuine couplings)

TOYOCONNECTOR is a hose manufacturer designed coupling exclusively for TOYOX hoses.
* TOYOSILICONE Hose Series Dedicated.Check the compatible hoses.
(Material: SUS/Cap nuts type/Couplings Specification: Male Thread)

It is a hose coupling that is useful in improving productivity, safety and energy saving properties by preventing problems such as insufficient flow, fluid leakage and hose disconnection between the hose and coupling, and improving the installation process of the hose to the coupling.

For better productivity, safety and energy saving properties, we recommend that you select hoses suitable for your specific application and conditions.

* It is the successor to the previous models TCSBS.

◆ Click here for a list of other hose fittings
◆ Click here for SS male thread hose fittings except than silicone hoses
◆ Click here for Plastic male thread hose fittings except than silicone hoses
◆ Click here for Brass male thread hose fittings except than silicone hoses

Important

*When installing, do not use a liquid screw sealant containing a solvent.

  • Guidance
  • Coupling Design Chart
  • List of Compatible Hoses
Connection Surface Connection Method Inner Diameter for Hose (mm) / Coupling Specification
Hose Side Cap Nut 9,12,15,19,25
Device Side Male Thread R3/8,R1/2,R3/4,R1
Product no. TC3-SS
Fluids Air Chemicals Oils Water (Non-drinkable)
Primary Material SUS
Materials Detail Cap nut: SCS13 (SUS304 equivalent)
Nipple: SCS16 (SUS316L equivalent)
Sleeve: PVDF
Functionality Easy to installEnergy savingPrevents leakage and disconnectionReusableStandardization of work
Certification RoHS2 (RoHS Revised) Certified

Feature:

  • Resistant to corrosion

    SCS 16 stainless steel is used, equivalent to SUS 316L. Superior resistance against rust and prevents steel leaching.

  • Prevents leaks and disconnections

    The unique construction allows the hose to be securely inserted to the base of the coupling, preventing hose disconnections and fluid leaks.

  • Time savings

    Hose insertion and removal is easy for increased efficiency.

  • Standardization of work (hyojunka)

    Fasten the cap nut fully to complete the operation.
    Hose insertion is simple and can be performed reliably and consistently no matter who does it.

  • Reduced pressure loss

    There is less fluid leakage, and with a larger effective surface area (hole diameter) than a barb fitting, there is less pressure loss.

  • Waste reduction

    Coupling units can be reused, reducing waste and cutting costs.

  • Resistance to vibration

    Hose problems due to leaks and disconnections caused by vibration are prevented, and earthquake and other disaster preventive maintenance, as well as restoration work after a disaster, are made easy.

  • Works with a variety of fluids

    The nipple and hose end fitting are integrated, and the construction prevents the plastic part of the sleeve inside the coupling from coming into contact with liquid. Can be used with fluids resistant to stainless steel.

Related Videos:

  • Comparison of pressure resistance and safety

  • Comparison of attachment workability

  • Pressure Loss Comparison

Note: Because of the presence of threads, this is not appropriate for sanitary hoses (such as used for foods).
Use for foods may result in safety issues in the product.

Part Number Thread Specification Dimensions (mm) Weight Packing Unit
L Φd1 HEX1 HEX2 g pc
Coupling Standards Chart · Schematic Drawing · TC3-SS TC3-SS9-R3/8 R3/8 48.0 6.9 30.0 24.2 133 20
TC3-SS12-R1/2 R1/2 53.0 10.1 32.0 27.0 178 20
TC3-SS15-R1/2 R1/2 55.0 13.3 36.0 30.8 217 20
TC3-SS19-R3/4 R3/4 59.5 16.9 41.0 35.8 290 10
TC3-SS25-R1 R1 66.0 22.8 50.0 43.8 438 10
Cap nut: SCS13 (SUS304 equivalent)
Nipple: SCS16 (SUS316L equivalent)
Sleeve: PVDF
Compatible Hoses : 6Hoses
Name
TOYOSILICONE HOSETOYOSILICONE-S HOSETOYOSILICONE-P HOSEHYBRID TOYOSILICONE HOSETOYOSILICONE STEAM HOSETOYOSILICONE THERMO HOSE
Material : SUS
Primary MaterialSiliconeSiliconeSiliconeSiliconeSiliconeSilicone
Functionality
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Pressure
Break Proof
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
Oil Resistant (Animal and Vegetables)
Pressure
Vacuum
Break Proof
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Pressure
Vacuum
Break Proof
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Pressure
Vacuum
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Pressure
Chemical Resistant
Cold Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Pressure
Product no.TSITSISTSIPHTSITSISTMTSITH
CertificationFDARoHS2 CertifiedFDARoHS2 CertifiedFDARoHS2 CertifiedFDARoHS2 CertifiedRoHS2 CertifiedRoHS2 Certified
Product CodeCompatible Hoses
Inner Diameter(mm)
Coupling Specification
TC3-SS9-R3/89R3/8---
TC3-SS12-R1/212R1/2-
TC3-SS15-R1/215R1/2-
TC3-SS19-R3/419R3/4
TC3-SS25-R125R1
Replacement Sleeve Set
Replacement Sleeve Set
Part Number Packing Unit
pc
TC3-SS9-S 20
TC3-SS12-S 20
TC3-SS15-S 20
TC3-SS19-S 10
TC3-SS25-S 10

Sleeve : PVDF

Attachment Method

1 First attach the nipple to the machine. Attachment Method · Model Shown1
2 Place the sleeve on the nipple.
*Check to ensure that the sleeve pins and the nipple pin holes are in alignment.
Attachment Method · Model Shown3
3 Pass the hose through the cap nut and insert the hose to the back of the nipple to ensure the sleeve does not become displaced.
*Ensure the assembly is secured tightly.
Attachment Method · Model Shown4
4 Fasten the cap nut until no gap remains. Attachment Method · Model Shown4

Attachment Tool

Use a wrench such as a regular adjustable or monkey wrench to finish tightening. Do not, however, use a pipe wrench as it will damage the nut portion.

Related Products