Product Code: TSIS TOYOSILICONE-S HOSE
- FDA
- USP CLASS VI Compliant
- RoHS2 Certified
TOYOSILICONE-S HOSE (For heat resistant and food)
Made of silicone rubber and able to handle pressure and vacuum feeds, pressure and heat, the TOYOSILICONE Hose has the excellent features of silicone such as heat resistance up to 150℃, and low leaching, insulation, and no odor. It can be used in equipment for the food industry, pharmaceutical industry, semiconductor industry, industrial furnace industry and more.
A general braid type hose, may bend or collapse during piping. In vacuum applications, the hose may collapse and become unusable, the metal coil may rust, or pulsation may occur during pressurization. TOYOSILICONE-S Hose is durable, capable of suction, and uses a reinforcing material that does not rust, so it helps improve safety, productivity and workability.
In addition to hoses, various dedicated couplings are available for higher safety and productivity.
◆ Click here for chemical and oil resistance suction hoses
◆ Click here for a list of heat resistant hoses
◆ Click here for hoses for high temperature water of 100°C or above except for food applications
◆ Click here for heat resistant braided hoses
◆ Click here for steam hose
Important
Warning
TOYOX products have been developed and manufactured for a broad range of industrial applications.
For applications that require safety, confirm in advance.
Never use for implant or injection application or other applications where there is a possibility of the product partially remaining in the body.
Toyox makes no guarantee of adaptability or safety related to such applications.
Please read the Handling Precautions carefully before use.
(1) Under no circumstances should these hoses be used for nonpolar organic solvents (such as benzene, toluene and hexane), halogenated hydrocarbons (such as methylene chloride or trichloroethane), concentrated strong acids, strong bases, mineral oil or steam. Also, do not use for animal or vegetable oil at temperatures exceeding 70℃. For steam cleaning, apply for a short time with a saturated steam pressure of less than 0.2 MPa at 130℃.
(2) Do not use for high temperature water at exceeding 100℃. Due to weakened reinforcement (thread), it can cause a hose puncture and secondary damage such as injury and burn.
(3) Note that silicone rubber has high gas permeability.Use caution when using this product with gases.Be sure to check “Precautions for Using Our Products Safely” before choosing a product.
- Guidance
- Use Example
- Standards Chart by Size
| Use | ： | For factory equipment (such as filling machines, cooling devices and heat-generating equipment) |
|---|---|---|
| Fluid | ： | Water (Non-drinkable)PowdersOils (Animal and Vegetables)Food (Including Fats)Drinkable WaterChemicalsAir |
| Function | ： |
|
| Certifications | ： |
Food Compliancy no. 595 FDA USP CLASS VI Compliant RoHS2 Compliant |
| Method | ： |
Primary Material: Silicone Materials: Polyester thread / SUS316 Diameter: 19.5mm~50.8mm Temperature Range: -30℃ ~150℃ High Water Temp(under 100℃) Steam(under 130℃ for a short time) Oils (Animal and Vegetable)(under 70℃) |
Feature:
-
Advantage 1
- It supports high-temperature fluids up to 150℃, and the inside of food grade hoses and floors can be washed (there are conditions regarding temperature, usage time, etc.)
- They remain flexible even at -30°C and can be used as piping hoses for filling and transporting.
- Resistant to bending and collapse, making it ideal for excessively bent piping and driving sections such as in filling machines
- Reduces product loss and trouble due to fluid stopping due to bending and collapse
-
Advantage 2
- Can also be used for vacuum and suction applications
- Nontoxic, and also safe and secure for food / beverage use
- The materials do not leach and there is no odor, providing worry-free conveyance for foods, beverages and more.
- Sanitary with use of rust resistant SUS316 reinforcing material
- Highly transparent and provides security in fluid verification.
-
Complies with various laws and regulations for safety and security
- Safe and secure due to its compliance with the Food Sanitation Act (Complying with Notice of the Ministry of Health, Labour and Welfare No. 595, 2012) ,FDA (US Food and Drug Administration) registered product (FDA DMF Type II No.25486 Registration) and corrected RoHS2 regulations
*This hose does not use phthalate plasticizers
-
Dedicated couplings provide improved productivity and safety
- A structure that causes very little liquid accumulation. Various dedicated couplings reduce the work of disassembling and cleaning food hose piping
- The dedicated couplings are easy to install and prevent fluid leakage and hose disconnection, improving safety and peace of mind
Related Videos:
-
Vacuum comparison
-
Bend Comparison
Worksite Improvement Case Studies
-
Stabilizing production by eliminating broken thread ruptures due to hose movements
-
Frequent hose replacement with hose assemblies in use means high costs and long lead times for crimped products, requiring countermeasures
-
Costs are high because couplings are discarded at the time of replacement every year!
-
Cleaning hoses with hot solutions causes them to break, decreasing work efficiency
-
Stainless steel pipes are difficult to lay out and the material inside is not visible.
Standards Chart by Size: Temperature Range -30℃ ~ 150℃
| Product Code | Inner dia. x Outer dia. (mm) |
Use pressure (MPa) |
Standard weight (kg/roll) |
Standard length (m) |
Minimum bend radius (mm) |
|---|---|---|---|---|---|
| TSIS-19 | 19.5×28.5 | -0.1~0.7 | 4.7 | 10 | 120 |
| TSIS-25 | 25.4×35.5 | -0.1~0.7 | 7 | 10 | 180 |
| TSIS-32 | 32 ×43.5 | -0.1~0.7 | 10 | 10 | 225 |
| TSIS-38 | 38.1×50.5 | -0.1~0.7 | 12.5 | 10 | 280 |
| TSIS-50 | 50.8×64.5 | -0.1~0.3 | 8.5 | 5 | 390 |
Packaging: Boxed
Coloring: Milky white / green line added
*-0.1 MPa is an approximate value. The product may not be used for some applications. See “Vacuum Pressure Reference Region“.
For barb fittings, use a nipple diameter 5% to 15% larger than the inner diameter of the hose (depending on the hose inner diameter).
*Click here for a simple size chart
| Genuine Couplings : 20 | Coupling Name | TOYOCONNECTOR | TOYOCONNECTOR | TOYOCONNECTOR | TOYOCONNECTOR | TOYOCONNECTOR | Hose Assemblies | Hose Assemblies | Hose Assemblies | Hose Assemblies | Hose Assemblies | Hose Assemblies | KAMLOK COUPLER | KAMLOK COUPLER | KAMLOK COUPLER | KAMLOK TWINLOK TYPE COUPLER | KAMLOK TWINLOK TYPE COUPLER | KAMLOK TWINLOK TYPE COUPLER | KAMLOK ADAPTER | KAMLOK ADAPTER | KAMLOK ADAPTER | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Hose Size | Hose Connection | Cap Nut | Cap Nut | Cap Nut | Clamp | Cap Nut | Fastener | Fastener | Fastener | Fastener | Fastener | Fastener | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | Hoseband | |
| Coupling Specification | Male Thread | Ferrule | Ferrule | Ferrule | Ferrule | Ferrule | Hexagon Nut | Coupler | Male Thread | Female Thread | Coupler | Coupler | Coupler | Coupler | Coupler | Coupler | Adapter | Adapter | Adapter | |||
| Primary Material | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | SUS | Aluminum Alloy | SUS | PP | Aluminum Alloy | SUS | PP | Aluminum Alloy | SUS | PP | ||
| Product no. | TC3-SS | TC3-FSG | TC3-FS | TC6-FS | TCFS | HF | HM | HNT | HC | H01 | H04 | 633-C-AL | 633-C-SST | 633-C-PP | 633-CL-AL | 633-CL-SST | 633-CL-PP | 633-E-AL | 633-E-SST | 633-E-PP | ||
| Certification |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Hoses Product Code |
Inner dia. (mm) |
Outer dia. (mm) |
 |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
| TSIS-19 | 19.5 | 28.5 | ◯ | ◯ | ◯ | - | - | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | ◯ | ◯ | ◯ |
| TSIS-25 | 25.4 | 35.5 | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| TSIS-32 | 32 | 43.5 | - | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | - | ◯ | ◯ | - | ◯ | ◯ | - |
| TSIS-38 | 38.1 | 50.5 | - | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
| TSIS-50 | 50.8 | 64.5 | - | - | - | ◯ | - | ◯ | ◯ | ◯ | ◯ | - | - | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ | ◯ |
